Exam 300-180: Troubleshooting Cisco Data Center Infrastructure, exam 300-180 exam torrent and reference materials
All Scheduled Dates Are Guaranteed to Run!
The Troubleshooting Cisco Data Center Infrastructure (DCIT) course is designed to help students prepare for the Cisco CCNP Data Center certification and for professional-level data center roles. The focus of this skills-building course is troubleshooting of LANs, SANs, Cisco Unified Fabric, Cisco Unified Computing System (UCS), and Cisco Application Centric Infrastructure (ACI). The course provides rich hands-on experience in resolving problems on Cisco MDS switches, Cisco Nexus switches, Cisco fabric extenders (FEXs), Cisco UCS, and Cisco ACI.
Target Audience
Data center administrators and engineers
Network administrators and engineers
Consulting systems engineers
Cisco integrators and partners
Data center designers and managers
Network designers and managers
Systems engineers
Prerequisites
Students considered for this training should have attended the following classes or obtained equivalent level of knowledge:
Introducing Cisco Data Center Networking (DCICN) v6.0
Introducing Cisco Data Center Technologies (DCICT) v6.0
Implementing Cisco Data Center Infrastructure (DCII) v6.0
Implementing Cisco Data Center Virtualization and Automation (DCVAI) v6.0
Implementing Cisco Data Center Unified Computing (DCUCI) v6.0
Training Objectives
Help candidates master the basic knowledge for the 300-180 exam, and so that you can pass the exam at last as well as improve your ablity in the process of training.
More useful information about 300-180 exam, please scan:
https://www.testsimulate.com/300-180-study-materials.html
Here are free demo for reference:
NEW QUESTION: 1
It has been determined that unknown unicast, multicast, and broadcast traffic is not correctly being
switched through either Nexus 7010 switch. Which statement best describes the cause of this issue?
A. The MST STP is not enabled on either switch.
B. The default VLAN is inactive.
C. VTP is not configured to handle this type of traffic.
D. No VLANs are allowed across the vPC peer link.
Answer: A
Explanation
The MST STP is not enabled on either switch
From both switches the "show spanning-tree mst" command shows that the switch is not in MST
mode.
NEW QUESTION: 2
Refer to the exhibit.
You have a server that fails to boot *which option is a possible cause of the issue?
A. an incorrect boot policy
B. incorrect LUN masking on the Storage array
C. an incorrect FC/FCoE target port in the SAN
D. incorrect zoning
Answer: B
NEW QUESTION: 3
Which configuration command is critical in order for OTV edge devices to maintain an overlay
adjacency with their local peers in a multihomed site via the join interfaces across the Layer 3
network domain?
A. otv extend-vlan <vlan.range>
B. otv site-identifier <id>
C. otv site-vlan <vlan-id>
D. otv use-adjacency-server <ip address> unicast-only
Answer: B
NEW QUESTION: 4
Refer to the exhibit.
What is the cause of the ISSU failure when using the command show system internal csm global info?
A. The reference count is less than 1 due to a lack of successful config-sync.
B. An Administrator is logged in on another session and has a lock of the session data base to prevent
ISSU.
C. The command conf-t is holding a lock and not released it.
D. It cannot be determined from the output.
E. The SSN feature is not enabled on both switches.
Answer: C
NEW QUESTION: 5
Which statement is true regarding FHRP considerations for an OTV network?
A. FHRP should be limited to only the internal OTV interfaces.
B. Using an AED eliminates the need for FHRP.
C. Filtering FHRP across the OTV network is recommended to avoid a suboptimal path due to the
election of a single default gateway.
D. VRRP is recommended over HSRP or GLBP.
Answer: C
NEW QUESTION: 6
Which two options would cause switch fabrics not to merge? (Choose two.)
A. The switches do not have at least one assigned domain ID in common.
B. The static domain ID does not override the dynamic ID
C. The switches have different assigned VSANs on the connecting pons.
D. The election of the static domain is only determined by the WWNs of the two switches,
E. The switches have different assigned VLANs on the connecting ports.
Answer: A,C
NEW QUESTION: 7
Refer to the exhibit. You configure a vPC between two Cisco Nexus 7000 Series switches but
the peer link will not come up. What is the problem?
A. The system priority must be the same.
B. The configuration is correct. The problem lies elsewhere.
C. The vPC domain numbers must be different.
D. The role priority must be the same.
Answer: A
NEW QUESTION: 8
Refer to the exhibit.
The output displays a failed SFP validation.
A. The speed needs to be changed to 1000
B. The fiber is not connected to the SFP
C. The speed needs to be changed to 10000,
D. The SFP is not a valid Cisco SFP
Answer: B
NEW QUESTION: 9
A customer reports that they are missing vPC peer link redundancy between two Cisco Nexus
5548UP switches. The interfaces on both switches are configured and cabled correctly. The interface
status is up/down on switch 1 and up/up on switch 2, Which two steps should be taken to isolate the
root cause? (Choose two.)
A. ask the customer if the link was ever functional
B. determine whether the fiber-optic cable manufacturer is valid under the interoperability matrix
C. determine Whether the fiber-optic cable type (single mode or multimode) matches the X2
modules
D. Swap the ends of the fiber-optic cable
E. swap the transceivers between the two interfaces
Answer: D,E
NEW QUESTION: 10
You install a new DIMM in a Cisco UCS C-Series standalone rack server and that DIMM is not
recognized by the server. What actions do you take to troubleshoot the problem? (Choose two)
A. Remove and dispose of the bad DIMM.
B. Verify that the DIMM is in a slot that supports an active CPU.
C. Verify that the DIMM has been qualified to work on Cisco UCS servers.
D. Return the DIMM for a new replacement.
E. Remove an old DIMM from the blue memory slot and install the new DIMM there.
Answer: A,C
NEW QUESTION: 11
On a Cisco Nexus 5500 Series Switch, the VFC is stuck in the initializing state. Which QoS
statements must be configured for FCoE to operate?
A. system qos
service-policy type qos input default-in-policy
service-policy type queuing input default-in-policy
service-policy type queuing output default-out-policy
service-policy type network-qos default-nq-policy
B. system qos
service-policy type qos input default-in-policy
service-policy type queuing input default-in-policy
service-policy type queuing output fcoe-default-out-policy
service-policy type network-qos fcoe-default-nq-policy
C. system qos
service-policy type qos input fcoe-default-in-policy
service-policy type queuing input fcoe-default-in-policy
service-policy type queuing output fcoe-default-out-policy
service-policy type network-qos fcoe-default-nq-policy
D. system qos
service-policy type qos input fcoe-default-in-policy
service-policy type queuing input fcoe-default-in-policy
service-policy type qos input default-in-policy
service-policy type network-qos default-nq-policy
Answer: C
NEW QUESTION: 12
Refer to the exhibit.
You see the fault when configuring a global ID pool on Cisco UCS Central. Which scenario could cause
the issue?
A. The same ID is assigned to the service profiles in two registered domains.
B. Global service profiles consume IDs from the blocks that have an assigned ID range qualifier
C. The same IP address is configured in two registered domains.
D. The same ID is defined in Cisco UCS Central and Cisco UCS Manager.
Answer: A
NEW QUESTION: 13
Which two protocols are important for DCBX to enable the 'no drop' classes that are needed
for lossless transmission? (Choose Two.)
A. FIP
B. LLDP
C. LACP
D. PFC
E. ETS
Answer: D,E
NEW QUESTION: 14
You see incoming updates in the logs from the hypervisor. But the State Of the Cisco APIC fails
to change Which option is a possible cause Of the issue?
A. The VMM credentials are incorrect.
B. The APIC is in a minority state
C. VMM is not integrated properly
D. No uplinks are configured on the Cisco AVS.
Answer: A
NEW QUESTION: 15
Refer to the exhibit.
You are configuring a Cisco APIC for access. Which task is being performed in the exhibit?
A. creating the LDAP provider group
B. creating the LDAP logjn domain
C. configuring APIC management EpG
D. creating the LDAP provider
Answer: D
NEW QUESTION: 16
Refer to the exhibit. What does the output in the Scope column indicate?
A. the VRF segment to which the rule applies
B. the VRF tenant to which the rule applies
C. the fabric zone to which the rule applies
D. the EPG to which the rule apples
Answer: A
if you want the detailed information of 300-180, you can visit:
Exam ARA01: Blue Prism ROM Architect (EN), exam ARA01 study materials and exam dumps
ARA01 Practice Exam
Choosing to participate inARA01 exam is a wise choice, because if you have a Blue Prism ROM Architect certification, your salary and job position will be improved quickly and then your living standard will provide at the same time. But passing ARA01exam is not very easy, it need to spend a lot of time and energy to master relevant IT professional knowledge. We will help you not only pass within the first try, but also save your valuable time. TestSimulate ARA01 practice test guarantees your success. Our goods have been recognised since the ARA01 prior to the check by many training institutions, if you'll be able to do all of the queries correctly,you can surely pass ARA01 exam at your first try.
ARA01 Exam Questions Help You Pass ARA01 Exam
Practice ARA01 exam dumps is often regarded as some of the most challenging you will face today. This increases the importance for you to use good quality updated ARA01 version, as they will provide you with a measure of how you will do in the actual ARA01 exam. After you master all the Materials, and you will surely have a thorough understanding of the exam. TestSimulate is the best site which provides you with the necessary ARA01 questions that will help you to get the ARA01 exam right on the first time.
Pass ARA01 Exam Successfully, Or 100% Money Back Guarantee
ARA01 exam is composed by current and active Information Technology experts, who use their experience in preparing you for Network Appliance ARA01 questions future in IT. ARA01 exam is a new turning point in the IT industry.. With the spread and progress of information technology, you will see hundreds of online resources which provide Network Appliance ARA01 questions and answers. IT professionals prepare for the Network Appliance certification ARA01 exam.
Try free demo before buying
You can get free demo in our website, and we recomend you to have a try before buying.
Free demo for reference:
NEW QUESTION: 1
Which of the following definitions best describes the "UAT" stage of the Delivery
Methodology?
A. Will be the process's introduction to the complete end-to-end business process
B. Will be the readiness to be roll out into the production environment
C. Will examine the process prior to a solution design and the commencement of the configuration
stage
D. Will explain how the process willbe automated
Answer: C
NEW QUESTION: 2
Which of the following statements describe the "Organization" for creating the foundations of
a Robotic Operating Model?
A. Defining the management, reporting, scheduling and referral handling processes for BAU
B. Agreeing the engagement model required to support operational processes
C. Defining the organizational design that best supports delivery of the RPA capability and aligns with
corporate strategy and culture
D. Identifying the expected business benefits and outline how these align to corporate strategy
Answer: A
NEW QUESTION: 3
Which of the following statements are true when describing the role and responsibility of the
Head of Robotic Automation?
A. Responsible for delivering RPA to the business
B. Responsible for oversight of the technology platform; interacting with IT as required
C. Manage internal and external dependencies to maintain business continuity
D. All of the above
Answer: D
NEW QUESTION: 4
Which of the following factors will not impact the time it takes to complete the journey?
A. Size and complexity of the organization
B. Cultural Adoption
C. Best Practices. Standards and Governance
D. Using agile methodology
Answer: C
NEW QUESTION: 5
Which of the following best describes the Live Proving phase of "Testing"?
A. Blue Prism processes are to be ran in a new or changed environment, testing must be done to
ensure the environment is set up correctly
B. Is a customer driven testing phase, giving the business the opportunity to ensure that the Blue
Prism solution that is being delivered fullymeets their requirements?
C. Process testing to ensure that all thespecified functionality is built into the process and it works as
expected, and the process is ready forverification
D. Ensures that the delivered process meet requirements, all known scenarios have been recognized
andtested, and an opportunity is given tothe business to identify anything previously missed inthe
process documentation
Answer: C
NEW QUESTION: 6
What percentage of tasks when onboarding a real person does Blue Prism state are still
relevant to onboarding a Digital Worker?
A. 80%
B. 90%
C. 30%
D. 70%
Answer: B
NEW QUESTION: 7
What does ODI Stand for?
A. Object Definition Instructions
B. Object Definition Instruments
C. Object Design Instruction
D. Object Design Instruments
Answer: C
NEW QUESTION: 8
Much of the following is nota foundation in the Robotic Operating Model?
A. Strategic Planning
B. Organization
C. Delivery Method
D. Technology
Answer: A
If you want to know more information about ARA01 exam dumps, you can visit:
Exam 070-535: Architecting Microsoft Azure Solutions, exam 070-535 practicing materials and exam dumps
Preparation for you 070-535 exam
Exam 070-535
Languages: English
Audiences:IT professionals
Technology: Microsoft Azure
Certification: Microsoft Azure
The exam training materials is the official study guide for Microsoft certification exams. Featuring concise, objective-by-objective reviews and strategic case scenarios and Thought Experiments, exam candidates get professional-level preparation for the exam. The Exam Ref helps candidates maximize their performance on the exam and sharpen their job-role skills. It organizes material by the exam's objective domains. Our training materials is a complete guide for the 070-535 exam covering architecting cloud solutions on Azure including all aspects of designing and creating a strategy for a complete solution leveraging the Microsoft Azure Cloud. This includes Azure Resource Manager (ARM) templates, Networking, Security, application storage and data access, advanced applications, web and mobile apps, compute infrastructure, and managing, monitoring and creating a business continuity strategy.
Skills measured
This exam measures your ability to accomplish the technical tasks listed below. The percentages indicate the relative weight of each major topic area on the exam. The higher the percentage, the more questions you are likely to see on that content area on the exam. View video tutorials about the variety of question types on Microsoft exams.
Please note that the questions may test on, but will not be limited to, the topics described in the bulleted text.
Do you have feedback about the relevance of the skills measured on this exam? Please send Microsoft your comments. All feedback will be reviewed and incorporated as appropriate while still maintaining the validity and reliability of the certification process. Note that Microsoft will not respond directly to your feedback. We appreciate your input in ensuring the quality of the Microsoft Certification program.
If you have concerns about specific questions on this exam, please scan:
https://www.testsimulate.com/070-535-study-materials.html
If you have other questions or feedback about Microsoft Certification exams or about the certification program, registration, or promotions, please contact your Regional Service Center.
Note To ensure that they are aware of the latest updates, it is recommended that all individuals registering for this exam review this page several times before their scheduled exam.
To learn more about these new exams and what they assess, visit:
https://www.testsimulate.com/070-535-study-materials.html
If you have taken this exam and want to transition to the new Azure Administrator certification, you should take Exam 070-535 : Microsoft Azure Administrator Certification Transition.
Who should take this exam?
Candidates for this exam implement infrastructure solutions in Microsoft Azure. Candidates have experience implementing and monitoring cloud and hybrid solutions as well as supporting application lifecycle management.
Here are free demo for reference:
NEW QUESTION: 1
You manage a bot in a serverless architecture.
The bot provides custom responses to questions based upon the identity of the user.
The bot must meet the following requirements:
* Identify the user by face.
* Provide text-to-speech reading of questions to the user.
* Analyze the text of the user's responses for patterns.
What should you recommend? To answer, drag the appropriate solution to the correct scenario. Each
solution may be used once, more than once, or not at all. You may need to drag the split bar between
panes to scroll or view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation
Note: With Azure, built-in intelligence is within the reach of all app developers. Enable your serverless
code or logic to use Machine Learning and Cognitive Services.
Box 1, Identify users by face: Azure Cognitive Services
Microsoft Face API, a cloud-based service that provides the most advanced face algorithms. Face API
has two main functions: face detection with attributes and face recognition.
Box 2, Provide text-to-speech services: Azure Cognitive Services
Infuse your apps, websites and bots with intelligent algorithms to see, hear, speak, understand and
interpret your user needs through natural methods of communication.
Example:
Speech: Convert spoken audio into text, use voice for verification, or add speaker recognition to your
app.
Box 3, Read questions to users: Azure Functions
Azure Functions is a serverless solution.
NEW QUESTION: 2
A company uses Azure AD Connect to synchronize on-premises and Azure identities.
The company uses Active Directory Federation Services (AD FS) for external users.
The AD FS servers run on Windows Server 2016.
You need to ensure that Azure AD Connect Health can analyze all AD FS audit logs.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point
A. On the Azure AD Connect server, set the audit level to Verbose.
B. On the Azure AD Connect server, enable security auditing.
C. On the AD FS servers, set the audit level to Verbose.
D. On the AD FS servers, enable security auditing.
Answer: C,D
NEW QUESTION: 3
You are designing a virtual network to support a web application. The web application uses
Blob storage to store large images. The web application will be deployed to an Azure App Service
Web App.
You have the following requirements:
* Secure all communications by using Secured Sockets Layer (SSL).
* SSL encryption and decryption must be processed efficiently to support high traffic load on the web
application.
* Protect the web application from web vulnerabilities and attacks without modification to backend
code.
* Optimize web application responsiveness and reliability by routing HTTP request and responses to
the endpoint with the lowest network latency for the client.
You need to configure the Azure components to meet the requirements.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation
Box 1: Azure Application Gateway
Application gateway supports SSL termination at the gateway, after which traffic typically flows
unencrypted to the backend servers. This feature allows web servers to be unburdened from costly
encryption and decryption overhead. However, sometimes unencrypted communication to the
servers is not an acceptable option. This could be due to security requirements, compliance
requirements, or the application may only accept a secure connection. For such applications,
application gateway supports end to end SSL encryption.
Box 2: Azure Security Center
Azure Security Center provides unified security management and advanced threat protection across
hybrid cloud workloads. With Security Center, you can apply security policies across your workloads,
limit your exposure to threats, and detect and respond to attacks.
Box 3: Azure Traffic Manager
Microsoft Azure Traffic Manager allows you to control the distribution of user traffic for service
endpoints in different datacenters. Service endpoints supported by Traffic Manager include Azure
VMs, Web Apps, and cloud services.
NEW QUESTION: 4
You need to ensure that customer data is secured both in transit and at rest.
Which technologies should you recommend? To answer, drag the appropriate technology to the
correct security requirement. Each technology may be used once, more than once, or not at all. You
may need to drag the split bar between panes or scroll to view content.
Answer:
Explanation
* Azure Rights Management service
Azure Rights Management service uses encryption, identity, and authorization policies to help secure
your files and email, and it works across multiple devices-phones, tablets, and PCs. Information can
be protected both within your organization and outside your organization because that protection
remains with the data, even when it leaves your organization's boundaries.
* Transparent Data Encryption
Transparent Data Encryption (often abbreviated to TDE) is a technology employed by both Microsoft
and Oracle to encrypt database files. TDE offers encryption at file level. TDE solves the problem of
protecting data at rest, encrypting databases both on the hard drive and consequently on backup
media.
* TLS/SSL
Transport Layer Security (TLS) and its predecessor, Secure Sockets Layer (SSL), are cryptographic
protocols designed to provide communications security over a computer network. They use X.509
certificates and hence asymmetric cryptography to authenticate the counterparty with whom they
are communicating, and to negotiate a symmetric key.
References: https://technet.microsoft.com/en-us/library/jj585004.aspx
http://en.wikipedia.org/wiki/Transparent_Data_Encryption
http://en.wikipedia.org/wiki/Transport_Layer_Security
NEW QUESTION: 5
Your team uses a proprietary source control product. You use FTP to manually deploy an
Azure website. You must move your source code from the proprietary source control product to a
secure on-premises Git versioning system. Instead of deploying the website by using FTP, the website
must automatically deploy to Azure each time developers check-in source files.
You need to implement the new deployment strategy. Which three actions should you perform in
sequence?
To answer, move the appropriate actions from the list of actions to the answer area and arrange
them in the correct order.
Answer:
Explanation
References:
http://www.almguide.com/2014/01/deploying-an-azure-website-from-a-local-git-repo/
NEW QUESTION: 6
You manage two cloud services named Service1 and Service2. The development team
updates the code for each application and notifies you that the services are packaged and ready for
deployment.
Each cloud service has specific requirements for deployment according to the following table. In the
table below, identify the deployment method for each service. Make only one selection in each
column.
Answer:
Explanation
Service1: Update by using package in Azure Storage
The package must be retained for disaster recovery purposes.
Service 2: Update by using from your local computer
Maintaining the existing service package is not required.
NEW QUESTION: 7
You plan to create a Content Delivery Network (CDN) in Azure that meets the following
requirements:
* Ensure that content can be preloaded into CDN endpoints.
* Accept client requests that use HTTP or HTTPS.
* Accept content from customized origin ports.
* Minimize costs per gigabyte (GB) delivered.
You need to create the CDN profile and endpoint.
Solution: You create a CDN profile by using the Azure CDN Standard from Verizon SKU. You configure
the profile to use a storage account endpoint.
A. Yes
B. No
Answer: B
NEW QUESTION: 8
You need to correlate the usage and performance data collected by Azure Application
Insights with configuration and performance data across the Azure resources that support the E-
Commerce Web Application.
What should you do?
A. write a query by using Azure Log Analytics.
B. Configure and enable the Azure Application Insight Profiler.
C. Create an Azure Log Analytics workspace and enable the Azure Diagnostics extension.
D. Use the Azure portal to query the Azure activity logs.
Answer: A
Explanation
Application Insights Analytics, which provides a rich query language for analyzing all data collected by
Application Insights. A query can be generated for you that renders the request count as a chart. You
can write your own queries to analyze other data.
References: https://docs.microsoft.com/en-us/azure/application-insights/quick-monitor-portal
NEW QUESTION: 9
You are designing an Internet-of-things (loT) solution for a company.
The project will deploy thousands of sensors that measure noise levels in the company's
manufacturing plants.
The design must meet the following requirements:
* Data from the loT devices must be monitored in near real-time.
* If the noise levels exceed certain thresholds a notification must be sent alerting the appropriate
people.
Different people may be notified based on the seventy of the threshold that has been exceeded.
* A mobile app will be distributed to those who need to receive notifications.
* The solution must allow configuration changes to be pushed to the loT devices.
You need to design the flow of data from the IoT devices to the sending of the notification.
Which five services should you use to process the data in sequence from input to output? To answer,
move the appropriate service from the list of services to the answer area and arrange them in the
correct order.
Answer:
Explanation
NEW QUESTION: 10
You need to implement the security requirements.
What should you implement?
A. the GraphAPI to query the directory
B. user certificates
C. LDAP to query the directory
D. single sign-on
Answer: D
Explanation
References:
https://blogs.msdn.microsoft.com/plankytronixx/2010/11/27/single-sign-on-between-on-premise-
apps-windows-
NEW QUESTION: 11
You deploy an Azure Web App. The Web App uses a storage account that contains a large
number of storage objects.
You need to grant clients access to application data for a specified interval of time while minimizing
effort.
What should you create?
A. a service shared access signature
B. a stored access policy
C. an account shared access signature
D. a network security group
Answer: C
NEW QUESTION: 12
You manage a solution in Azure. You plan to add several new features to the solution.
You identify the following requirements:
* The deployment technology must support load balancing and service discovery.
* Trigger a Biztalk Server workflow to process Electronic Data Interchange (EDI) data.
You need to identify which technical implementation is suitable for each functionality.
What should you recommend? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation
References:
https://docs.microsoft.com/en-us/azure/logic-apps/logic-apps-what-are-logic-apps
https://docs.microsoft.com/en-us/javascript/api/overview/azure/logic-apps?view=azure-node-
2.2.0#management-package
NEW QUESTION: 13
You have an Azure website that runs on several instances. You have a WebJob that provides
additional functionality to the website.
The WebJob must run on all instances of the website.
You need to ensure that the WebJob runs even when the website is idle for long periods of time.
How should you create and configure the WebJob object? To answer, select the appropriate options
in the answer area.
Answer:
Explanation
* You can run programs or scripts in WebJobs in your App Service web app in three ways: on
demand, continuously, or on a schedule.
* For continuous WebJobs there is an important feature called "always on" which is only available for
a Standard Website, this will make sure your Website and WebJob are always up.
References:
http://azure.microsoft.com/en-us/documentation/articles/web-sites-create-web-jobs/
NEW QUESTION: 14
You are building an application that will run in a virtual machine (VM). The application will
use Managed Service Identity (MSI).
The application uses Azure Key Vault, Azure SQL Database, and Azure Cosmos DB.
You need to ensure the application can use secure credentials to access these services.
Which authorization method should you recommend? To answer, select the appropriate options in
the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation
References:
https://docs.microsoft.com/en-us/azure/active-directory/msi-tutorial-windows-vm-access-nonaad
https://docs.microsoft.com/en-us/azure/active-directory/msi-tutorial-windows-vm-access-sql
https://docs.microsoft.com/en-us/azure/cosmos-db/database-security
NEW QUESTION: 15
You need to recommend a solution architecture for the Tailspin Toys Customer Analyzes app.
What should you do recommend? To answer, drag the appropriate solutions to the correct
components. Each solution may be used once, more than once, or not at all. You may need to drag
the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation
NEW QUESTION: 16
Note: This question is part of a series of questions that present the same scenario. Each ques-
tion on the series contains a unique solution that might meet the stated goals. Some question sets
might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these
questions will not appear in the review screen.
You manage a solution in Azure. You configure Event Hubs to collect telemetry data from dozens of
industrial machines. Hundreds of events per minute are logged in near real-time. You use this da-ta
to create dashboards for analysts.
The company is expanding their machinery and wants to know if the current telemetry solution will
be sufficient to handle the volume of the increasing workload. The volume will increase 10 times by
year end and on a regular basis thereafter. Latency will become more and more important as volume
increases.
Messages must be retained for a week. Data must be captured automatically without price increase.
You need to recommend a solution.
Solution: Use the fully-managed platform as a service option in the dedicated tier to handle the
increased volume.
Does the solution meet the goal?
A. Yes
B. No
Answer: B
Explanation
Azure Event Hubs Dedicated is ideal for customers that need a single-tenant deployment, not the
fully-managed platform, to manage the most demanding requirements.
NEW QUESTION: 17
A company plans to implement Azure Cosmos DB.
You need to recommend client network connection options to maximize performance.
What should you recommend? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation
Box 1: Direct mode
Connection policy: Use direct connection mode
Gateway Mode involves an additional network hop every time data is read or written to Azure
Cosmos DB.
Because of this, Direct Mode offers better performance due to fewer network hops.
Box 2: TCP
Direct mode supports connectivity through TCP and HTTPS protocols. For best performance, use the
TCP protocol when possible.
NEW QUESTION: 18
Your company has an on-premises Active Directory Domain Services (AD DS) domain and an
established Azure Active Directory (Azure AD) environment.
Your company would like users to be automatically signed in when they are on their corporate
desktops that are connected to the corporate network.
You need to enable single sign-on (SSO) for company users.
Solution: Configure an AD DS server in an Azure virtual machine (VM). Configure bidirectional
replication.
Does the solution meet the goal?
A. No
B. Yes
Answer: A
Explanation
Single sign on (SSO) can be enabled via Azure AD Connect.
Reference: https://docs.microsoft.com/en-us/azure/active-directory/connect/active-directory-
aadconnect-sso
NEW QUESTION: 19
You have business services that run on an on-premises mainframe server.
You must provide an intermediary configuration to support existing business services and Azure. The
business services cannot be rewritten. The business services are not exposed externally.
You need to recommend an approach for accessing the business services.
What should you recommend?
A. Expose the business services to the Azure Service Bus by using a custom service that uses relay
binding.
B. Connect to the on-premises server by using a custom service in Azure.
C. Expose the business services externally.
D. Move all business service functionality to Azure.
Answer: D
Explanation
References:
http://azure.microsoft.com/en-gb/documentation/articles/service-bus-dotnet-how-to-use-relay/
NEW QUESTION: 20
A company has a hybrid ASP.NET Web API application that is based on a software as a service
(SaaS) offering.
Users report general issues with the data. You advise the company to implement live monitoring and
use ad hoc queries on stored JSON data. You also advise the company to set up smart alerting to
detect anomalies in the data.
You need to recommend a solution to set up smart alerting.
What should you recommend?
A. Azure Application Insights and Azure Log Analytics
B. Azure Data Lake Analytics and Microsoft Operations Management Suite.
C. Azure Site Recovery and Microsoft Operations Management Suite
D. Azure Security Center and Azure Data Lake Store
Answer: A
Reference information for exam 070-535:
https://www.testsimulate.com/070-535-study-materials.html
Exam PT0-001: CompTIA PenTest+ Certification Exam, exam PT0-001 exam bootcamp and reference information
About CompTIA CompTIA PenTest + certification exam
In today's society CompTIA PenTest + education is very popular and you can receive CompTIA PenTest + education around anywhere you live anywhere in the world. It is well known to candidates that the CompTIA PenTest + certification exam training is very popular among people in the IT domain.
In recent years, the CompTIA PenTest + certification exam has become the international standard of many major IT companies. In order to be an expert in the CompTIA PenTest + Certification exam area, you need to study all the test items. By using the CompTIA PenTest + Certification Exam Questions, you can determine how much expert knowledge your examinee has acquired.
Like many of the exam takers around the world, are you worried whether you can pass the CompTIA PenTest + certification exams? It seems better to find a good exam preparation material than doing so. Now, desperately do not study the content of the exam questions carefully, you can qualify directly if you use the related examination collection of us.
What is the reason for choosing the CompTIA exam dumps?
Quality Assurance
According to the contents of the exam, accurately grasp the content of the exam and can provide a collection of problems with most of the knowledge points coverage.
Full Refund
We will offer test materials to our customers and we guarantee that we can pass, even if the study time is short. In case of failure, we guarantee that we will refund the full amount.
One Year Free Update
We provide free update service in one year and is very helpful for passing the certification exam. If the exam contents change, we will inform the customer immediately. And, if there is an updated version, we will send it to you.
Try Free Demo before Buying
We offfer you demo for free. By using a free demo, you can have a better idea of what you are going to buy.
More relating useful information for PT0-001 exam, please scan:
https://www.testsimulate.com/PT0-001-study-materials.html
Free demo for you:
NEW QUESTION: 1
A tester has captured a NetNTLMv2 hash using Responder Which of the following commands
will allow the tester to crack the hash using a mask attack?
A. hashcat -m 5600 -r rulea/beat64.rule hash.txt wordliat.txt
B. hashcat -m 5600 -o reaulta.txt hash.txt wordliat.txt
C. hashc&t -m 5600 -a 3 haah.txt ?a?a?a?a?a?a?a?a
D. hashcax -m 5600 hash.txt
Answer: A
NEW QUESTION: 2
A constant wants to scan all the TCP Pots on an identified device. Which of the following Nmap
switches will complete this task?
A. -p 1-65534
B. -p ALX,
C. -p-
D. -port 1-65534
Answer: C
NEW QUESTION: 3
Which of the following has a direct and significant impact on the budget of the security
assessment?
A. Compliance requirement
B. Scoping
C. Target risk
D. Scheduling
Answer: B
NEW QUESTION: 4
If a security consultant comes across a password hash that resembles the following b117
525b3454 7Oc29ca3dBaeOb556ba8 Which of the following formats is the correct hash type?
A. NetNTLMvl
B. NTLM
C. Kerberos
D. SHA-1
Answer: D
NEW QUESTION: 5
Click the exhibit button.
A penetration tester is performing an assessment when the network administrator shows the tester a
packet sample that is causing trouble on the network Which of the following types of attacks should
the tester stop?
A. DNS cache poisoning
B. ARP spoofing
C. SMTP relay
D. SNMP brute forcing
Answer: B
NEW QUESTION: 6
Which of the following CPU register does the penetration tester need to overwrite in order to
exploit a simple butter overflow?
A. Stack pointer register
B. Index pointer register
C. Destination index register
D. Stack base pointer
Answer: A
NEW QUESTION: 7
Which of the following types of physical security attacks does a mantrap mitigate-?
A. Impersonation
B. Shoulder surfing
C. Tailgating
D. Lock picking
Answer: C
NEW QUESTION: 8
Click the exhibit button.
Given the Nikto vulnerability scan output shown in the exhibit, which of the following exploitation
techniques might be used to exploit the target system? (Select TWO)
A. SQL injection
B. Cross-site request forgery
C. Login credential brute-forcing
D. Arbitrary code execution
E. Session hijacking
Answer: A,C
If you are interested in PT0-001 exam dumps, you can visit:
https://www.testsimulate.com/PT0-001-study-materials.html
Exam CRT-402: Certification Preparation for Platform App Builder, exam CRT-402 questions and answers and latest version
Our Salesforce Certification Preparation for Platform App Builder CRT-402 certification exam dumps preparation material for Salesforce CRT-402 Exam are prepared by experts and examiners in the field of . They have unparalleled expertise in creating examination Salesforce CRT-402 exam dumps material for Salesforce Certification Preparation for Platform App Builder CRT-402 certification exam. We fully cover all aspect of Salesforce Certification Preparation for Platform App Builder CRT-402 Exam. We conduct a series of evaluations to ensure that our Salesforce Certification Preparation for Platform App Builder CRT-402 Exam questions are up to date.
Three version are available:
Practice PDF:
Printable CRT-402 PDF Format
Prepared by CRT-402 Experts
Instant Access to Download
Study Anywhere, Anytime
365 Days Free Updates
Free CRT-402 PDF Demo Available
Soft Test Engine:
Installable Software Application
Simulates Real Exam Environment
Builds CRT-402 Exam Confidence
Supports MS Operating System
Two Modes For Practice
Practice Offline Anytime
Online Engine:
Online Tool, Convenient, easy to study.
Instant Online Access
Supports All Web Browsers
Practice Online Anytime
Test History and Performance Review
Supports Windows / Mac / Android / iOS, etc.
Here are some free demo for reference:
NEW QUESTION: 1
When a user creates an Account report, the user does not see Industry as an available field in
the report builder. However, this same user is able to see it in the Account page layout What scenario
would cause this?
A. The Industry field is not enabled for the particular record type
B. The user uses a custom report type which does not include the Industry field.
C. The Industry field has no record values in the Account.
D. The user does not have Industry field visibility in the field - level security
Answer: B
NEW QUESTION: 2
Which objects can be members of a campaign? Choose 2 answers
A. Account
B. Opportunity
C. Lead
D. Contact
Answer: C,D
NEW QUESTION: 3
Universal Containers has deployed custom tabs through change sets, without including the
profiles, to production (enterprise edition). Which statement is true in regards to the visibility of
custom tabs?
A. Custom tabs are exposed for all users
B. Custom tabs are default on for all users
C. Custom tabs are hidden for allusers
D. Custom tabs are default off for all users
Answer: C
NEW QUESTION: 4
Universal container manages internal projects by department using a custom object called
projects. Only employees in the project's respective department should have view access to all of the
department's project records.If an employee changes job roles and moves to another department,
the employee should no longer have access to the projects within their former department. How can
these requirements be met, assuming the organization-wide default for projects is set to private?
Choose 2 answers
A. Create a criteria based sharing rule using the projects department that grants access to users by
public groups.
B. Create a criteria based sharing rule using the projects department that grants access to users by
profiles
C. Create a criteria based sharing rule using the projects department that grants access to users by
permission set.
D. Create a criteria based sharing rule using the projects department that grants access to users by
roles.
Answer: A,D
NEW QUESTION: 5
Universal Containers provides access toSalesforce for their sales, service and marketing teams.
Management wants to ensure that when users log in, their home tab provides access to links and
documentation that are specifically relevant to their job function. How can this requirement be met?
A. Expose specific elements within a home page custom components determined by profile.
B. Create separate home page custom components and layouts; assign to users by profile
C. Create separate home page custom components and layouts; assign to users by role.
D. Expose specific elements within a home page custom component determined by role.
Answer: B
NEW QUESTION: 6
Where can a custom button be placed? Choose 3 answers
A. On a related list
B. On the Custom List View
C. On the User Object
D. On a Web-to-Case form
E. On a Person Account
Answer: A,B,E
NEW QUESTION: 7
The director of marketing has asked the app builder to create a formula field that tracks how
many days have elapsed since a contact was sent a marketing communication. The director is only
interested in whole units.
Which function should be used to calculate the difference?
A. Today()
B. Date()
C. Now()
D. Datevalue()
Answer: A
NEW QUESTION: 8
What is a true statement in regards to managing access to reports and dashboards? Choose 2
answers
A. Users must have certain permissions to access public, hidden, or shared folder.
B. Users with the "Manage Public Reports" permission can organize reports by creating custom
report folders and sending invitations to users to access them.
C. Users with the "Manage Public Reports" and "Create and Customize Reports" permissions can
create custom reports that all users can view.
D. Users that want to grant access to personal folders can manually share a personal folder with a
user or public group.
Answer: B,C
NEW QUESTION: 9
The app builder needs to change the data types of new custom fields. The app builder is not
able to delete and recreate any of the fields, nor modify any apex code. Which data type change will
require the app builder to perform the additional steps in order to retain existing functionalities?
A. Changing the data type of a field used in lead conversion from number to text
B. Changing the data type of a field used as an external id from number to text.
C. Changing the data type of a field used in an apex class from number to text.
D. Changing the data type of a field used in a report from a text to an encrypted field
Answer: B
NEW QUESTION: 10
Universal Containers sales reps can modify fields on an opportunity until it is closed. Only the
sales operation team can modify the post closed follow-up dates and post closed follow-up
comments fields. How can these requirements be met?
A. Use multiple record types, page layouts and profiles.
B. Use field level security to mark fields as read only on the sales profile
C. Use record types with field sets and restrict editing fields using field-level security.
D. Use field-level security on page layouts to restrict editing fields
Answer: D
More useful information about exam CRT-402 can be found in:
Exam AZ-100: Microsoft Azure Infrastructure and Deployment, exam AZ-100 study guide materials and learning materials
Pass your next AZ-100 exam!
Nowadays, the benefits of getting a higher salary and promotion opportunities beckon exam candidates to enter for the test for their better future (AZ-100 test dumps: Microsoft Azure Infrastructure and Deployment). The importance of choosing the right dumps is self-evident. But the success of your test is not only related to your diligence, but concerned with right choices of Microsoft Azure Infrastructure and Deployment questions & answers which can be a solid foundation of your way. We provide efficient dumps for you with features as follow:
High passing rate
Every test has some proportion to make sure its significance and authority in related area, so is this test. So to exam candidates of Microsoft area, it is the same situation. But you do not need to worry about it. We offer the AZ-100 test dumps: Microsoft Azure Infrastructure and Deployment with passing rate reached up to 98 to 100 percent, which is hard to get, but we did make it. Instead of hesitating, we suggest you choose our Microsoft Azure Infrastructure and Deployment questions & answers as soon as possible and begin your journey to success as fast as you can. We guarantee more than the accuracy and high quality of the AZ-100 dump collection, but the money you pay for it. The full refund service give you 100 percent confidence spare you from any kinds of damage during the purchase.
Using less time to your success
The average spend of time of the former customers are 48 to 72 hours. So you do not have to spend plenty of time on the AZ-100 test dumps: Microsoft Azure Infrastructure and Deployment with the method like head of the thigh, cone beam. Our dumps are effective products with high quality to help you in smart way. We believe with your regular practice of the knowledge and our high quality Microsoft Azure Infrastructure and Deployment questions & answers, you can defeat every difficult point you may encounter. We have always been exacting to our service standard to make your using experience better, so we roll all useful characters into one, which are our AZ-100 exam dumps,
One year updates freely
Because different people have different buying habits, so we designed three versions of AZ-100 test dumps: Microsoft Azure Infrastructure and Deployment. All of them are usable with unambiguous knowledge and illustration. Besides, we provide new updates lasting one year after you place your order of Microsoft Azure Infrastructure and Deployment questions & answers, which mean that you can master the new test points based on real test. To the new exam candidates especially, so it is a best way for you to hold more knowledge of the AZ-100 dumps PDF. About the new versions, we will send them to you instantly for one year, so be careful with your mailbox (AZ-100 test dumps: Microsoft Azure Infrastructure and Deployment). There are so many former customers who appreciated us for clear their barriers on the road, we expect you to be one of them too. Our Microsoft Microsoft Azure Infrastructure and Deployment exam questions cannot only help you practice questions, but also help you pass real exam easily. Success is the accumulation of hard work and continually review of the knowledge, may you pass the test with enjoyable mood with AZ-100 test dumps: Microsoft Azure Infrastructure and Deployment!
After purchase, Instant Download: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 10 minutes, please contact us. Note: don't forget to check your spam.)
Free Demo for reference:
NEW QUESTION: 1
You create an Azure Storage account named contosostorage.
You plan to create a file share named data.
Users need to map a drive to the data file share from home computers that run Windows 10.
Which port should be open between the home computers and the data file share?
A. 3389
B. 443
C. 80
D. 445
Answer: D
Explanation
Ensure port 445 is open: The SMB protocol requires TCP port 445 to be open; connections will fail if
port 445 is blocked.
References: https://docs.microsoft.com/en-us/azure/storage/files/storage-how-to-use-files-windows
NEW QUESTION: 2
You need to define a custom domain name for Azure AD to support the planned infrastructure.
Which domain name should you use?
A. Install Azure AD Connect on a server in the Miami office and enable Pass-through Authentication
B. Install the Active Directory Federation Services (AD FS) role on a domain controller in the Miami
office.
C. Allow inbound TCP port 8080 to the domain controllers in the Miami office.
D. Join the client computers in the Miami office to Azure AD.
E. Add
http://autologon.microsoftazuread-sso.com to the intranet zone of each client computer in the
Miami office.
Answer: A,E
Explanation
Every Azure AD directory comes with an initial domain name in the form of
domainname.onmicrosoft.com.
The initial domain name cannot be changed or deleted, but you can add your corporate domain
name to Azure AD as well. For example, your organization probably has other domain names used to
do business and users who sign in using your corporate domain name. Adding custom domain names
to Azure AD allows you to assign user names in the directory that are familiar to your users, such as
'alice@contoso.com.' instead of
'alice@domain name.onmicrosoft.com'.
Scenario:
Network Infrastructure: Each office has a local data center that contains all the servers for that office.
Each office has a dedicated connection to the Internet.
Humongous Insurance has a single-domain Active Directory forest named humongousinsurance.com
Planned Azure AD Infrastructure: The on-premises Active Directory domain will be synchronized to
Azure AD.
References: https://docs.microsoft.com/en-us/azure/active-directory/fundamentals/add-custom-
domain
NEW QUESTION: 3
You have an Azure subscription that contains a virtual machine named VM1. VM1 hosts a line-
of-business application that is available 24 hours a day. VM1 has one network interface and one
managed disk. VM1 uses the D4s v3 size.
You plan to make the following changes to VM1:
* Change the size to D8s v3.
* Add a 500-GB managed disk.
* Add the Puppet Agent extension.
* Attach an additional network interface.
Which change will cause downtime for VM1?
A. Add the Puppet Agent extension.
B. Attach an additional network interface.
C. Change the size to D8s v3.
D. Add a 500-GB managed disk.
Answer: C
Explanation
While resizing the VM it must be in a stopped state.
References: https://azure.microsoft.com/en-us/blog/resize-virtual-machines/
NEW QUESTION: 4
Note: This question is part of a series of questions that present the same scenario. Each
question in the series contains a unique solution that might meet the stated goals. Some question
sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these
questions will not appear in the review screen.
You have an Azure subscription that contains 10 virtual networks. The virtual networks are hosted in
separate resource groups.
Another administrator plans to create several network security groups (NSGs) in the subscription.
You need to ensure that when an NSG is created, it automatically blocks TCP port 8080 between the
virtual networks.
Solution: You assign a built-in policy definition to the subscription.
Does this meet the goal?
A. Yes
B. No
Answer: B
NEW QUESTION: 5
You have an Azure subscription that contains the resources in the following table.
To which subnets can you apply NSG1?
A. the subnets on VNet3 only
B. the subnets on VNet1 only
C. the subnets on VNet2 only
D. the subnets on VNet2 and VNet3 only
E. the subnets on VNet1, VNet2, and VNet3
Answer: A
Explanation
All Azure resources are created in an Azure region and subscription. A resource can only be created in
a virtual network that exists in the same region and subscription as the resource.
References: https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-vnet-plan-
design-arm
NEW QUESTION: 6
You have an Azure subscription named Subscription1. Subscription1 contains the resource
groups in the following table.
RG1 has a web app named WebApp1. WebApp1 is located in West Europe.
You move WebApp1 to RG2. What is the effect of the move?
A. The App Service plan to WebApp1 remains to West Europe. Policy1 applies to WebApp1.
B. The App Service plan to WebApp1 moves to North Europe. Policy2 applies to WebApp1.
C. The App Service plan to WebApp1 remains to West Europe. Policy2 applies to WebApp1.
D. The App Service plan to WebApp1 moves to North Europe. Policy1 applies to WebApp1.
Answer: C
NEW QUESTION: 7
You have an Azure subscription.
You plan to use Azure Resource Manager templates to deploy 50 Azure virtual machines that will be
part of the same availability set.
You need to ensure that as many virtual machines as possible are available if the fabric fails or during
servicing.
How should you configure the template? To answer, select the appropriate options in the answer
area.
NOTE: Each correct selection is worth one point.
Select two alternatives below.
A. platformUpdateDomainCount: 50
B. platformFaultDomainCount: 4
C. platformUpdateDomainCount: 30
D. platformFaultDomainCount: 0
E. platformFaultDomainCount: 2
F. platformFaultDomainCount: 3
G. platformFaultDomainCount: 1
H. platformUpdateDomainCount: 10
I. platformUpdateDomainCount: 20
J. platformUpdateDomainCount: 40
K. platformUpdateDomainCount: 25
Answer: E,I
Explanation
Use two fault domains.
2 or 3 is max, depending on which region you are in.
Use 20 for platformUpdateDomainCount
Increasing the update domain (platformUpdateDomainCount) helps with capacity and availability
planning when the platform reboots nodes. A higher number for the pool (20 is max) means that
fewer of their nodes in any given availability set would be rebooted at once.
References:
https://www.itprotoday.com/microsoft-azure/check-if-azure-region-supports-2-or-3-fault-domains-
managed-disk
https://github.com/Azure/acs-engine/issues/1030
NEW QUESTION: 8
You have an Azure DNS zone named adatum.com. You need to delegate a subdomain named
research.adatum.com to a different DNS server in Azure. What should you do?
A. Create an PTR record named research in the adatum.com zone.
B. Modify the SOA record of adatum.com.
C. Create an NS record named research in the adatum.com zone.
D. Create an A record named ".research in the adatum.com zone.
Answer: D
Explanation
Configure A records for the domains and sub domains.
References:
http://www.stefanjohansson.org/2012/12/how-to-configure-custom-dns-names-for-multiple-
subdomain-based-az
More ralating information about AZ-100 exam:
Good News: I passed the 300-180 exam just one time!
I attended the 300-180 exam few months ago, and I passed the exam successfully, now I'd like to share my experiences with you. The practice materials I use are from Cisco. There are 218 questions and answers in total, and it contains the major knowledge points for the exam. Also I encountered most questions I had practiced in the Cisco exam dumps, and there only a few questions that puzzled me, but I could finish the rest of the questions, therefore, I pass the exam successfully. And the exam 300-180: Troubleshooting Cisco Data Center Infrastructure materials in theCisco helped me a lot, and also I get the CSA+ successfully. Therefore I recommend it to you here. If you have interest you can have a look in:
