Exam 400-101: CCIE Routing and Switching Written Exam v5.1, exam 400-101 exam braindumps and reference information
Like every exam the 401-101 CCIE exam is also conducted to examine the knowledge of candidates. The main task of this exam is to observe the skills of candidates and to check how candidates conduct the CCIE Routing and Switching. This exam serves as a source that helps to check the abilities of professionals about switching and routing techniques.
Specialty of the 400-101 CCIE Exam Training Material
CertificationsDesk’s 400-101 training material is designed by experts according to up to the standard and fulfills all needs about 400-101 CCIE Routing and Switching Written Exam. This training material gives a friendly interface that is easily handled by any candidate. For the betterment of candidates, CertificationsDesk.com provide valid dumps .pdf questions. For candidates, it offers a vast range of quizzes (in the form of multiple choices, fill in the blank and true & false). At the end, different types of practice stuff is also included in PDF file. The main purpose of our product is to produce all relevant stuff that can be used in the exam and training and it also helps candidates so that they can pass their exam and get good results.
Features of 400-101 Practice Exam Dumps Product are:
Innovation
Appropriate according to required training material
Questions that covers the course of 400-101 exam
Quizzes
Assessment assignments
Things that covered in CCIE 400-101 PDF Questions dumps
We present multiple styles of evaluation that is useful for candidates during the preparation session. Our software provides advanced level training for this written exam. After using this file, candidates can prepare themselves for this certification because this certification proves a milestone in the sector of IT networking.
Our PDF version presents all important stuff that fulfills all necessary stuff in the 400-101 exam and in this PDF questions we produce all important questions that can be used in the exam. 400-101 questions dump help candidates during their preparation. CCIE Routing and Switching written exam is a technical exam that covers the topics related to the infrastructure of an enterprise network, components of interoperating and functionality of device configurations.
The 400-101 practice test covers all types of configuration issues, troubleshooting problems that happened in the infrastructure of complex enterprise network. In 400-101 questions answer patterns, we provide all necessary information about the configurations of any secure routing solutions. This information is very useful for candidates who are working in diverse complex infrastructures. Cisco technology certification exam is useful, especially in routing and switching section.
The reason why candidates buy 400-101 Exam
The core objective of 400-101 exam dumps is to develop candidates for this exam. This is the main reason that we offer it in the form of 400-101 PDF dumps. 400-101 dumps PDF is present in both online and PDF file. Thus any candidate can prepare for this exam in a excellent way.
Free demo for reference:
NEW QUESTION: 1
Which protocol allows connections made by an NBMA network to dynamically learn
connected addresses?
A. PPP
B. HDLC
C. NHRP
D. POP
Answer: A
NEW QUESTION: 2
Which two options are func1ions of the master controller in PfR? (Choose two.)
A. It enforces the traffic path.
B. It performs traffic inspection.
C. It learns the traffic path.
D. It provides network visibility.
E. It applies the policy.
Answer: C,E
NEW QUESTION: 3
Which three criteria are used for stackwise election of a master switch?
A. highest MAC address
B. lowest MAC address
C. user-selected priority
D. longest uptime
E. Vl.AN revision number
F. I0S version number
Answer: B,C,D
NEW QUESTION: 4
What is the correct order of the VSS initialization process? Drag and drop the actions on the
left to the correct initialization step on the right.
Answer:
Explanation
NEW QUESTION: 5
Which two parameters need to be the same for two routers to form an EIGRP
neighbofship.(Choose two)
A. Network type
B. Subnet Mask
C. AS number
D. Hello and Dead Timers
E. K-Values
Answer: C,E
NEW QUESTION: 6
How does Control Plane Policing protect the route processor?
A. It treats the route processor as a separate entity within MQC.
B. It marks non-essential traffic and moves it to the Scavenger class.
C. It disables access to the control plane during an attack.
D. It dynamically enables ingress ACLs on selected interfaces.
Answer: A
NEW QUESTION: 7
Refer to the exhibit.
What is the PHB class on this flow?
A. EF
B. CS4
C. AF21
D. none
Answer: B
NEW QUESTION: 8
Drag each routing protocol on the left to the matching statement on the right Select and Place:
Answer:
Explanation
NEW QUESTION: 9
Refer to the exhibit.
Which two conclusions can you draw from this output? (Choose two.)
A. The device at 192.168.5.119 is on the same subnet as the next hop for the device at 10.9.132.254
B. The device that produced the output uses different interfaces to send and receive traffic to and
from the device at 10.9.132.254
C. The device that produced the output uses the same interface to send and receive traffic to and
from the device at 10.9.132.254
D. The device at the 192.168.5.119 routing table has an ARP entry for the device at 10.9.132.254
E. The packet was source-routed
Answer: A,C
NEW QUESTION: 10
Refer to the exhibit.
If a Layer 3 switch running OSPF in a VRF- lite configuration reports this error, which action can you
take to correct the problem?
A. Set mls cef maximum-routes in the global configuration
B. Add the vri-lite capability to the OSPF configuration.
C. Configure the control plane with a larger memory allocation to support the Cisco Express
Forwarding Information Base.
D. Upgrade the Layer 3 switch to a model that can support more routes.
Answer: A
NEW QUESTION: 11
Drag and drop each IPv6 neighbor discovery message type on the left to the corresponding
description on the right.
Answer:
NEW QUESTION: 12
Refer to the exhibit.
Router A is connected as BGP neighbor to routers B and C.
Which path does router A use to get to AS 65010?
A. through router B because the default local preference is 500 and higher than router
B. through router B because ii has the shortest AS path.
C. will load balance because both routes have the same Med value.
D. through router C because it has a higher local preference.
Answer: D
NEW QUESTION: 13
Which command can you enter to configure a Cisco router running OSPF to propagate the
static default route 0.0.0.0 0.0.0.0 172.31.15.1 within the OSPF process?
A. Default-information originate
B. Redistribute static subnets
C. Redistribute static metric 1 subnets
D. Redistribute static
Answer: A
NEW QUESTION: 14
What is a requirement for BFD static route support?
A. All routers that will carry traffic must have the same software version.
B. BFD must be configured on all Ethernet, virtual-template, and dialer interfaces that will carry
traffic.
C. CEF must be configured on all routers that will carry traffic.
D. All routers that will carry traffic must be the same model.
Answer: C
NEW QUESTION: 15
Which two statements correctly describe IGMP filtering? (Choose two)
A. It controls the way in which multicast traffic can access a port
B. It forwards IGMP reports to the upstream multicast router to support source-base filtering
C. It can designate a port as a multicast host port instead of a multicast router port
D. It enables a device to function as a multicast endpoint
E. It requires IGMP snooping to be enabled
F. It filters IGMP membership reports and queries
Answer: E,F
NEW QUESTION: 16
Which two statements about MSDP are true? (Choose two)
A. All MSDP domains on a given network can share a common RP.
B. It uses loopback interfaces for anycast RP addresses.
C. It requires multicast sources to be in the same domain.
D. It uses 32-bit anycast RP addresses.
E. It uses UDP to establish peering sessions.
F. It requires multicast receivers to be in the same domain.
Answer: A,C
More relating information for exam 400-101, please scan:
