Exam 300-180: Troubleshooting Cisco Data Center Infrastructure, exam 300-180 exam dumps and training materials
All Scheduled Dates Are Guaranteed to Run!
The Troubleshooting Cisco Data Center Infrastructure (DCIT) training matrials are designed to help students prepare for the Cisco CCNP Data Center certification and for professional-level data center roles. The focus of this skills-building is troubleshooting of LANs, SANs, Cisco Unified Fabric, Cisco Unified Computing System (UCS), and Cisco Application Centric Infrastructure (ACI). The course provides rich hands-on experience in resolving problems on Cisco MDS switches, Cisco Nexus switches, Cisco fabric extenders (FEXs), Cisco UCS, and Cisco ACI
Target Audience
Data center administrators and engineers
Network administrators and engineers
Consulting systems engineers
Cisco integrators and partners
Data center designers and managers
Network designers and managers
Systems engineers
Here are reasons for choosing us:
High-quality for Sharing-and-Visibility-Designer exam:
With experienced experts to compile and verify the Sharing-and-Visibility-Designer exam dumps, the quality can be guaranteed.
Three versions for your option:
PDF version: printable and easy study anywhere
Online test engine: support all web browsers, and test history and performance review
Soft test engine: two modes for practice, and stimulate the real exam environment
Insatant download:
You can receive the downloading link and password within ten minutes.
Pass guarantee and money back guarantee:
We can ensure you that you can pass the exam, and if you fail to pass the exam, we will give you full refund.
Free demo to have a try:
We have free demo for you to have a try, so that you can have a better understanding of what you are going to buy.
Free demo as follows:
NEW QUESTION: 1
Refer to the exhibit. What does the output in the Scope column indicate?
A. the EPG to which the rule apples
B. the VRF tenant to which the rule applies
C. the VRF segment to which the rule applies
D. the fabric zone to which the rule applies
Answer: C
NEW QUESTION: 2
On a Cisco Nexus 5500 Series Switch, the VFC is stuck in the initializing state. Which QoS
statements must be configured for FCoE to operate?
A. system qos
service-policy type qos input fcoe-default-in-policy
service-policy type queuing input fcoe-default-in-policy
service-policy type qos input default-in-policy
service-policy type network-qos default-nq-policy
B. system qos
service-policy type qos input fcoe-default-in-policy
service-policy type queuing input fcoe-default-in-policy
service-policy type queuing output fcoe-default-out-policy
service-policy type network-qos fcoe-default-nq-policy
C. system qos
service-policy type qos input default-in-policy
service-policy type queuing input default-in-policy
service-policy type queuing output default-out-policy
service-policy type network-qos default-nq-policy
D. system qos
service-policy type qos input default-in-policy
service-policy type queuing input default-in-policy
service-policy type queuing output fcoe-default-out-policy
service-policy type network-qos fcoe-default-nq-policy
Answer: B
NEW QUESTION: 3
A customer reports that they are missing vPC peer link redundancy between two Cisco Nexus
5548UP switches. The interfaces on both switches are configured and cabled correctly. The interface
status is up/down on switch 1 and up/up on switch 2, Which two steps should be taken to isolate the
root cause? (Choose two.)
A. swap the transceivers between the two interfaces
B. determine whether the fiber-optic cable manufacturer is valid under the interoperability matrix
C. ask the customer if the link was ever functional
D. Swap the ends of the fiber-optic cable
E. determine Whether the fiber-optic cable type (single mode or multimode) matches the X2
modules
Answer: A,D
NEW QUESTION: 4
You install a new DIMM in a Cisco UCS C-Series standalone rack server and that DIMM is not
recognized by the server. What actions do you take to troubleshoot the problem? (Choose two)
A. Return the DIMM for a new replacement.
B. Verify that the DIMM is in a slot that supports an active CPU.
C. Remove an old DIMM from the blue memory slot and install the new DIMM there.
D. Verify that the DIMM has been qualified to work on Cisco UCS servers.
E. Remove and dispose of the bad DIMM.
Answer: D,E
NEW QUESTION: 5
Refer to the exhibit. You configure a vPC between two Cisco Nexus 7000 Series switches but
the peer link will not come up. What is the problem?
A. The system priority must be the same.
B. The role priority must be the same.
C. The vPC domain numbers must be different.
D. The configuration is correct. The problem lies elsewhere.
Answer: A
NEW QUESTION: 6
Which two options would cause switch fabrics not to merge? (Choose two.)
A. The switches have different assigned VSANs on the connecting pons.
B. The switches have different assigned VLANs on the connecting ports.
C. The election of the static domain is only determined by the WWNs of the two switches,
D. The switches do not have at least one assigned domain ID in common.
E. The static domain ID does not override the dynamic ID
Answer: A,D
NEW QUESTION: 7
It has been determined that unknown unicast, multicast, and broadcast traffic is not correctly being
switched through either Nexus 7010 switch. Which statement best describes the cause of this issue?
A. No VLANs are allowed across the vPC peer link.
B. The default VLAN is inactive.
C. The MST STP is not enabled on either switch.
D. VTP is not configured to handle this type of traffic.
Answer: C
Explanation
The MST STP is not enabled on either switch
From both switches the "show spanning-tree mst" command shows that the switch is not in MST
mode.
NEW QUESTION: 8
You see incoming updates in the logs from the hypervisor. But the State Of the Cisco APIC fails
to change Which option is a possible cause Of the issue?
A. The APIC is in a minority state
B. VMM is not integrated properly
C. The VMM credentials are incorrect.
D. No uplinks are configured on the Cisco AVS.
Answer: C
NEW QUESTION: 9
Which statement is true regarding FHRP considerations for an OTV network?
A. VRRP is recommended over HSRP or GLBP.
B. Using an AED eliminates the need for FHRP.
C. Filtering FHRP across the OTV network is recommended to avoid a suboptimal path due to the
election of a single default gateway.
D. FHRP should be limited to only the internal OTV interfaces.
Answer: C
NEW QUESTION: 10
Refer to the exhibit.
You see the fault when configuring a global ID pool on Cisco UCS Central. Which scenario could cause
the issue?
A. The same ID is defined in Cisco UCS Central and Cisco UCS Manager.
B. Global service profiles consume IDs from the blocks that have an assigned ID range qualifier
C. The same ID is assigned to the service profiles in two registered domains.
D. The same IP address is configured in two registered domains.
Answer: C
NEW QUESTION: 11
Refer to the exhibit.
You are configuring a Cisco APIC for access. Which task is being performed in the exhibit?
A. creating the LDAP logjn domain
B. creating the LDAP provider group
C. configuring APIC management EpG
D. creating the LDAP provider
Answer: D
NEW QUESTION: 12
Which configuration command is critical in order for OTV edge devices to maintain an overlay
adjacency with their local peers in a multihomed site via the join interfaces across the Layer 3
network domain?
A. otv site-vlan <vlan-id>
B. otv extend-vlan <vlan.range>
C. otv use-adjacency-server <ip address> unicast-only
D. otv site-identifier <id>
Answer: D
NEW QUESTION: 13
Refer to the exhibit.
What is the cause of the ISSU failure when using the command show system internal csm global info?
A. The SSN feature is not enabled on both switches.
B. The reference count is less than 1 due to a lack of successful config-sync.
C. It cannot be determined from the output.
D. An Administrator is logged in on another session and has a lock of the session data base to prevent
ISSU.
E. The command conf-t is holding a lock and not released it.
Answer: E
NEW QUESTION: 14
Refer to the exhibit.
You have a server that fails to boot *which option is a possible cause of the issue?
A. an incorrect FC/FCoE target port in the SAN
B. an incorrect boot policy
C. incorrect zoning
D. incorrect LUN masking on the Storage array
Answer: D
NEW QUESTION: 15
Refer to the exhibit.
The output displays a failed SFP validation.
A. The speed needs to be changed to 10000,
B. The SFP is not a valid Cisco SFP
C. The speed needs to be changed to 1000
D. The fiber is not connected to the SFP
Answer: D
NEW QUESTION: 16
Which two protocols are important for DCBX to enable the 'no drop' classes that are needed
for lossless transmission? (Choose Two.)
A. ETS
B. FIP
C. LACP
D. PFC
E. LLDP
Answer: A,D
More relating useful information for exam 300-180 can visit:
