More relating information about 300-160 exam can be found:
Here are some free demo:
NEW QUESTION: 1
What is required when configuring the second fabric interconnect in a cluster configuration?
A. The IP address of the management port must be in the same subnet as the peer fabric
B. The first and the second fabric interconnects must be able to reach the DNS.
C. The system name of the second fabric interconnect must be different from the system name of
the first fabric interconnect.
D. The IP address of the default gateway must be on the same subnet as the peer fabric interconnect.
NEW QUESTION: 2
Which two options represent an access layer solution designed to accelerate server
virtualization, that is managed just like other network devices in the data center? (Choose two)
D. host vPC
When server virtualization is implemented, the edge of the network is pushed from the traditional
location in the network access layer, implemented in physical switches, to the virtual network access
layer that is implemented in software in the server hypervisor. The Cisco Nexus 1000V Switch is an
intelligent virtual network access layer switch that runs Cisco NX-OS Software, Cisco's data center
operating system that runs on all Cisco data center products. Operating inside the Microsoft Hyper-V
hypervisor, the Cisco Nexus
1000V supports Cisco Virtual Network Link (VN-Link) server virtualization technology to provide:
* Policy-based virtual machine connectivity
* Mobile virtual machine security and network policy
* Nondisruptive operating model for your server virtualization and networking teams When server
virtualization is implemented in the data center, servers and virtual machines are not managed the
same way as physical servers. Server virtualization is treated as a special deployment, leading to
longer deployment time, with more coordination needed among server, network, storage, and
security administrators. With the Cisco Nexus 1000V, you have a consistent networking feature set
and configuration and provisioning model for both the physical and the virtual networks. Virtual
machine networks can use the same network configuration, security policy, diagnostic tools, and
operating models as physical server deployments that are connected to physical switches. This
unified approach provides faster deployment and troubleshooting and makes the administration of
virtualization environments essentially the same as for nonvirtualized deployments.
Developed in close collaboration with Microsoft, the Cisco Nexus 1000V Switch is certified by
Microsoft and integrates with Microsoft Windows Server and Microsoft System Center Virtual
Machine Manager (SCVMM). You can use the Cisco Nexus 1000V to manage your virtual machine
connectivity with confidence in the integrity of the server virtualization infrastructure.
Cisco Nexus 1000V Switch Components
Cisco Nexus 1000V Switches have two main components:
* Virtual supervisor module (VSM)
* Virtual Ethernet module (VEM)
The VSM provides the switch control and management plane, and the VEM provides the data plane
for the switch (Figure 1). The VSM can run as a virtual machine on any Microsoft Hyper-V host or as a
virtual service node on the Cisco Nexus 1010 and 1110.
The VEM runs as a plug-in (extension) to the Microsoft Hyper-V switch in the hypervisor kernel,
providing switching between virtual machines.
Cisco Nexus 1000V sees the VSMs and VEMs as modules. In the current release, a single VSM can
manage up to 64 VEMs. The VSMs are always associated with slot numbers 1 and 2 in the virtual
chassis. The VEMs are sequentially assigned to slots 3 through 66 based on the order in which their
respective hosts were added to the Cisco Nexus 1000V Switch.
NEW QUESTION: 3
You are deploying a VM-FEX You have a VM that must be able to attach to a dynamic vNIC.
Which action do you take on the VIC adapter?
A. Add the VIC adapter to a vNIC pool.
B. Configure two static vNICs.
C. Dynamically configure the VIC adapter to connect to a vNIC.
D. Configure a single vNIC only.
NEW QUESTION: 4
Which components share a physical interface in a VDC deployment?
A. storage VDC for FCoE traffic and a VDC for Ethernet traffic
B. two storage VDCs for FCoE traffic
C. two VDCs for Ethernet traffic
D. interface VLAN and a VDC
NEW QUESTION: 5
The classical aggregation layer design does not provide isolation on the control plane and on
the data plane.
What is the solution to this problem?
C. Cisco ISO ISSU
NEW QUESTION: 6
You are designing a data center network using Cisco Nexus 7000 Series switches. Which
feature should be configured to control the rate at which packets are allowed to reach the
A. relaxed process startup
B. control plane policing
C. embedded event manager
D. port channel load balancing method
E. data plane policing
NEW QUESTION: 7
Which statement accurately describe the allocation of IP pool for out of Band management of
A. The management IP address used to access CIMC on a server can be out of band address the inter
connect via the fabric uplink port
B. A maximum of Sixteen OOB IP address can be configure to access the CIMC on the server
C. A maximum of eight OOB IP address can be configure to access the CIMC on the server
D. The management IP address used to access CIMC on a server can be out of band address the inter
connect via the Management port
NEW QUESTION: 8
Which technology does Cisco recommend tor connecting a main data center to a remote data
NEW QUESTION: 9
If an individual link fails which three features reduce convergences times when used with the
protocols such as?
E. Port Channels
NEW QUESTION: 10
Which access layer technology will provide redundancy if there is a link failure on a server link?
C. Cisco OTV
Relating useful study guide materials about 300-160 exam: