Help you pass the 300-175 exam successfully!
The Cisco Data Center Unified Computing Support Specialist is designed to test a learner's knowledge of the fundamentals of the Cisco Unified Computing System and their ability to implement a virtualized Data Center environment. Cisco Data Center Unified Computing Support Specialist professionals will also be tested on the following components:
Implementing the Cisco Unified Computing System B and C Series
Cisco Unified Computing System in an enterprise data center routing and switching infrastructure
Next-generation Cisco Nexus product family
The CCNP Data Center certification and training program offers comprehensive certification and Professional-level skills focused on the data center solutions, technologies and best practices to design, implement, and manage a modern data center infrastructure.
IT practitioners who are Cisco trained and certified are uniquely qualified for key roles in complex data center environments, with expertise utilizing technologies including policy-driven infrastructure, virtualization, automation and orchestration, unified computing, data center security, and integration of cloud initiatives. CCNP Data Center certified professionals are highly qualified for senior roles chartered with enabling digital business transformation initiatives.
More information about exam 300-175:
Some free demos are as follows:
NEW QUESTION: 1
Which two Cisco UCS components require drivers? (Choose two.)
B. board controller
NEW QUESTION: 2
Refer to the exhibit.
Which description of the result is true?
A. An Ethernet monitoring session was created where traffic may be copied and forwarded to slot 1
port 9 for analysis.
B. Ethernet traffic from slot 9 port 1 will be copied and forwarded to the destination SPAN port for
C. Ethernet traffic from slot 1 port 9 will be copied and forwarded to the destination SPAN port for
D. An Ethernet monitoring session was created, activated and committed.
NEW QUESTION: 3
You have a Cisco UCS server connected to Cisco Fabric Interconnects. Which two options are
characteristics of a virtual machine that is deployed by using VMFEX in high- performance mode in
this environment? (Choose two.)
A. The dynamic vNIC can connect redundantly by using hardware-based failover to the Cisco UCS
Fabric interconnect cluster.
B. The virtual machine deployed in VM-FEX high-performance mode runs on the host by using the
default BIOS policy that is available in the Cisco UCS Manager
C. Dynamic vNICs inherit parameters from static vNICs
D. The virtual machine connects to a Cisco VIF on the external switch by using Cisco VN- Link in
hardware, bypassing the hypervisor.
E. The virtual machine can share the same dynamic vNIC with another virtual machine in VMFEX
In high-performance mode, traffic to and from a virtual machine (VM) bypasses the DVS and
hypervisor. Traffic travels directly between VMs and the virtual interface card (VIC) adapter.
The benefits of high-performance mode are as follows:
-Increases I/O performance and throughput.
-Decreases I/O latency.
-Improves CPU utilization for virualized I/O-intensive applications. You must modify or create several
policies in order for VM-FEX for VMware to function optimally:
-VMwarePassThrough Ethernet Adapter Policy (high-performance mode only)
-Dynamic vNIC Connection Policies
-BIOS Policy (high-performance mode only)
-VM Lifecycle Policy
Dynamic vNICs are always protected in Cisco UCS, but this field allows you to select a preferred
fabric, if any. You can choose one of the following:
-Protected Pref A-Cisco UCS attempts to use fabric A but fails over to fabric B if necessary
-Protected Pref B-Cisco UCS attempts to use fabric B but fails over to fabric A if necessary Protected-
Cisco UCS uses whichever fabric is available Reference:
NEW QUESTION: 4
Which item describes the failure scenario called a "split-brain" in the Cisco Unified Computing
A. Failure of a Cisco Unified Computing System Chassis Management Controller
B. Failure of a Cisco Unified Computing System Chassis Management Switch
C. Failure of a Cisco Unified Computing System Fabric Interconnect
D. Failure of the Cisco Unified Computing System L1-L2 network
E. Failure of a Cisco Unified Computing System I/O module
NEW QUESTION: 5
A network administrator has configured all required settings for the Smart Call Home feature
in Cisco UCS. What must be done next?
A. Send a system inventory message to start the registration process.
B. Generate a fault to initiate a message that will start the registration process.
C. Open a TAC case to verify contract information and start the registration process.
D. The system automatically starts the registration process and no further action is required.
NEW QUESTION: 6
Which protocol is not supported for Cisco UCS backups and imports?
NEW QUESTION: 7
You are using UCS version 2.4 or later and need to advertise the identity of a server by using
LLDP instead of CDP. Which policy in the vNIC template accomplishes this goal?
B. network control
C. Ethernet adapter
D. LAN connectivity
NEW QUESTION: 8
You have a Cisco FabricPath network. You must implement vPC+ for a downstream switch.
Which three actions should you perform? (Choose three.)
A. Configure the switch ID on the peer switches.
B. Establish a peer link between the peer switches.
C. Configure the upstream switch to use PAgP on EtherChannel.
D. Configure a peer keepalive between the peer switches.
E. Connect the downstream switch to a 10-Gb port.
F. Configure the downstream switch to use PAgP on EtherChannel.
NEW QUESTION: 9
Which two parameters must be configured on a standalone Cisco UCS C-Series Server to export
the technical support data to a remote server? (Choose two)
A. Install an FTP server
B. Specify a remote TFTP server IP address.
C. Specify the remote relative path and file name.
D. Install a certificate
E. Set the source as the UCS server IP address.
NEW QUESTION: 10
Which two settings are required when utilizing DirectPath I/O? (Choose two.)
A. Set port profile performance to "high".
B. adapter profile update
C. VM queue modification
D. Enable VMQ with the "enable-netadaptervmq" cmdlet.
E. full memory reservation
F. CPU pinning
G. Install DirectPath VIB on host.
H. vCPU pinning
NEW QUESTION: 11
Which description of an import operation in Cisco UCS Manager is true?
A. You can choose to merge or replace the existing UCS configuration during an import.
B. You can import only a configuration file that was exported from the same Cisco UCS Manager.
C. You can schedule an import operation.
D. You can import a configuration from a higher release to a lower release.
NEW QUESTION: 12
To boot from SAN, you must perform which two configurations on a Cisco UCS system?
A. Put the server WWPN and the storage array WWPN in the same zone.
B. Put the boot VSANin a dedicated boot service profile template.
C. Enter the boot LUN and the nWWNs.
D. Create a dedicated boot VSAN.
E. Create a LUN, and allow the server WWPN to have access to the LUN.
NEW QUESTION: 13
Which two AAA protocols are supported by a remote AAA database? (Choose two.)
C. Microsoft Active Directory
onfiguration_Guide_141_chapter7.html#concept_FAA777771F5D4F14A82A479CE D0D4AF 4
NEW QUESTION: 14
Which consideration must be made when utilizing a WWxN pool?
A. WWNN assignment must be set to derived.
B. WWPN assignment must be set to derived.
C. Only HBA templates can use WWxN pools.
D. A SAN connectivity policy must be used.
NEW QUESTION: 15
A Cisco UCS Administrator is planning to complete a firmware upgrade using Auto install.
Which two options are prerequisites to run Auto install? (Choose two.)
A. time synchronization
B. minor fault fixing
C. fault suppression started on the blade servers
D. configuration backup
E. service profiles unmounted from the blade servers
NEW QUESTION: 16
Which slot(s) contain DIMMs in a 1DPC configuration on Cisco UCS blade server?
B. 1 and 2 only.
NEW QUESTION: 17
Refer to the Exhibit:
You are integrating Cisco UCS Director with the ACI fabric. Where do you create the account type?
B. Bare Metal Agents
C. Managed Network Elements
D. Multi-Domain Managers
NEW QUESTION: 18
Which addressing does Cisco UCS Manager use when communicating with Cisco UCS Central?
A. UCS CIMC
B. IP addresses of the UCS Fabric Interconnects
C. IP address of the UCS KVM
D. VMware ESXi server
More useful information about 300-175 can be found in: